Lucent Cit Software Install

Software download (generic) OverviewAlcatel-Lucent 1850 TSS-5 supports local and remote software downloads for the SYSCTL circuit pack, VLNC50/52/55 circuit packs, and for packs that operate independent of the SYSCTL circuit pack (VLNC40, VLNC42/42B, VLNC60, VLNC61, VLNC62, VLNC64).When new software is downloaded to the SYSCTL circuit pack, a compressed software image is download to FLASH memory. The new software is uncompressed and moved to the active boot memory space. During this process, the older software release continues to run in random access memory (RAM). Installation is not service-affecting, so down time is limited to the time it takes to reboot.

Local software download for the SYSCTL and controlled circuit packsAlcatel-Lucent 1850 TSS-5 supports the following local software downloads.Local software download from a WaveStar ® CIT connected to the CIT RS-232 (RS-232 serial) port on the SYSCTL circuit pack faceplate. Local software installation via File Transfer Protocol (FTP) from a WaveStar ® CIT connected to the CIT LAN (IAO LAN) port on the SYSCTL circuit pack faceplate. Software installation via FTP requires the following:.FTP Client software is enabled on the NE.IP parameters are provisioned on the NE.Important!Serial Download (TERM) is not supported in the Microsoft Windows ® XP Operating System. Therefore, FTP must be used to install software when using the Microsoft Windows ® XP Operating System.

Lucent Cit Software Install Windows 7

Local software download for non-SYSCTL controlled circuit packsFor circuit packs that are not controlled by the SYSCTL circuit pack, Alcatel-Lucent 1850 TSS-5 supports local software installation via Trivial File Transfer Protocol (TFTP).